Solution and maintenance of folder gluer

With the rapid development of the times, the application of cartons has been extended to various fields. No matter what kind of company it is, there is a need to use cartons. In addition to the exquisite appearance printing, the production of carton boxes also includes multiple processes such as paper mounting, die cutting, and box gluing. Each production process is very important and directly affects the quality of subsequent product processing. The folder gluer plays a vital role in it. But when we use the machine, it is inevitable that there will be failures, so when there are some simple problems, what should we do? Wait for the maintenance personnel to come to repair or solve it by yourself? I think the first thing most people think of is their own maintenance, because it takes too long to wait for the maintenance personnel, which seriously affects the production speed. So the editor has sorted out some problems that we often receive feedback from customers.

Solution

1. The glue is not strong: check the amount of glue, if the glue is too much or too thick, it will cause whitening, if the amount of glue is too small, the glue will be weak, so you must grasp the amount when gluing , To avoid causing too much or too little.
2. The paper feed direction is wrong: only need to adjust the position of the paper gauge and the pressure balance of each part.
3. The direction of the glue box is not correct. This requires adjusting the position of the glue box and equalizing the pressure of each part, which can be dealt with with the experience of the box-gluer captain.
4. The surface of the plastic box is scratched: a layer of film can be covered first, but the adhesive side can not be covered, otherwise it will not be good to glue.
5. Inaccurate bonding position of the box-gluer: When die-cutting, increase the die-cutting pressure at the main line of the color box or widen the width of the main line of the color box.

maintainance

1. The machine needs to be kept clean and clean, and it needs to be cleaned and cleaned after each operation.
2. Note that the conveyor belt on the folder gluer is naturally aging and needs to be replaced regularly.
3. It is strictly forbidden to adjust the speed when the governor is stopped, otherwise the belt will be severely worn.
4. It is best to drive slowly before turning on the machine and check whether the machine has abnormal noise.
After we use the machine, we need to do a maintenance on the machine, which can not only extend the life of the machine, but also ensure the quality of the product. The problem should be solved as soon as the machine encounters the problem, otherwise it will cause more problems in the future, and will also affect the output, and the gain will not be worth the loss.