Check the performance and maintenance methods of the gluing machine
For the machine, maintenance is essential. Even if the machine you buy is very expensive and the configuration is top-notch, if you use it for a long time without maintenance, the performance of the machine will also decrease, which will directly affect the quality of the product. Good or bad. So today we will share with you the maintenance methods of the gluing machine.
Judge the pros and cons of gluing machine performance
1. Whether the cardboard can be glued with the lowest amount of glue;
2. Whether it can maintain a stable vehicle speed without degumming;
3. Whether the stability of glue quality can be maintained;
4. Whether it is easy to clean.
Maintenance method of gluing machine
1. The cleaning of the machine must be carried out immediately when the whole line stops working. If the paste is solidified due to the parking for too long, the accumulation of paper scraps and the scraper dry hard, it will make the cleaning more difficult.
2. When cleaning, adjust the gap between the squeegee roller and the squeegee roller as much as possible.
3. Turn off the glue valve.
4. Pull out the paste baffle, and drain the paste in the paste pan. And remove or lower the paste plate.
5. Spray the squeegee roller and the squeegee plate with water. Use a hard brush to scrub the surface of each roller and the squeegee plate until there is no paste on the rollers.
6. Use a non-metallic scraper to scrape clean the accumulated paste on both sides of the roller and the shaft.
7. After cleaning the paste pan with water until it is clean, let the water flow clean, then put the paste pan to the normal position and fix it.
8. Check every day if there is any leak in the gas path, and repair it immediately if there is any. Check the air compressor for oil and water, no oil to refuel, and water to drain.
9. Check whether the surface temperature of the preheating roller is normal every week, and check whether each part of the steam pipeline is leaking, whether the trap is blocked, and if there is a problem, solve it immediately.
10. Check whether the bolts are loose every week, and fix them if they are loose.
11. Grease each bearing chain once a week.
12. Check the parallelism of the squeegee roller and the squeegee roller weekly, the parallelism is 0.03 mm, and the data at both ends are consistent. If there is any problem, repair it immediately.
13. Lubricate the eccentric gear sleeve every week.
For machine maintenance, we have rich experience, and the above is a simple description of the Carton gluing, if you want to know more, you can try to contact us, we will give you an answer as soon as possible .
